Gibsy F 249 is an inflatable boat without much hassle during assembly and transportation. This is an advantage that allows you to save time and avoid unnecessary actions.
1. The slatted floor that the boat is equipped with does not need to be pulled out when folding and inflating. The boat folded with it is placed in a bag, and then in a box on the transom or in the trunk of a car.
2. Since the lifeboat weighs only 36.5 kg and is 2.49 m long, it can be easily placed on the roof of a vehicle or on board a vessel while inflated.
3. For final assembly after inflation, all you have to do is install the seats and the motor.
Navigation safety is one of the main goals of the designers. To achieve this, they used in the manufacture of boats of the F series a fabric of increased density, strength and water resistance, as well as separately pumped air chambers of the hull.
For the manufacture of a rigid transom, where the motor mount and the engine plate are attached, marine plywood is used. This is a multilayer material, the sheets of which are impregnated with Bakelite. Alternating layers with multidirectional fibers provide additional strength. As a result, marine plywood does not absorb moisture and does not rot, and its strength is comparable to the strength of a sheet of steel of the same thickness, with one important difference - plywood does not rust.The sides of the hull are reliably protected from damage during mooring with a flexible wide PVC tape, which is used as a fender and is securely welded around the entire perimeter.
The performance of the Gibsy F 249 has been significantly improved by increasing the diameter of the air chambers to 42 cm, which has increased rigidity, and with it, improved maneuverability. It can be equipped with a 5 hp engine, which allows you to develop higher speeds. The carrying capacity was also increased to 3 people.
Buy a Gibsy F 249 inflatable boat if you prefer quality and safety without too much hassle.
No posts found