A5 Series Polyform Pear-shaped Fender - Ø 70 cm

These are A series models from Polyform U.S. original - an expert in the field of protective devices for marine vessels. They are designed to protect the sides of the boat when mooring or docking. A5 series Polyform fenders are multifunctional thanks to their shape and reinforced eye head. They can be used for bow/stern protection and as a signal or mooring buoy. It is necessary during mooring, maneuvering inside narrow lock chambers or while anchored side by side with other vessels.

Thanks to its versatility, you can use one batch of Polyform fenders in a variety of ways.

1. Due to its pear shape, fenders produced by Polyform U.S. original do an excellent job of protecting the bow. Therefore, you can combine: to protect the sides, buy cylindrical fenders, and for the nose - pear-shaped ones.
2. A5 series fenders will do an excellent job of protecting the stern. In Mediterranean marinas, this type of mooring is usually offered. Although tidal currents and rip currents are rare in this region, this type of mooring, as well as maneuvering next to other boats, can pose danger to both your boat and those around you. But not with fenders from Polyform U.S. original.
3. As side protection, they also show themselves in the best way: they take on most of the impact force, distributing it over the entire protection area, which reduces the impact force at each point of contact. In all three cases the fenders provide a shock-absorbing and damping effect. As a result, the rocking of the boat is extinguished, the impact force becomes minimal.

If you're into any type of scuba diving or if you have to anchor in a region with soils that do not hold a conventional anchor, this pear-shaped inflatable fender makes a great signal buoy. Used as a mooring buoy, it is visible from afar thanks to the classic nautical signal colors. In this A5 series there are two color variations - white and orange.

If you're into any type of scuba diving or if you have to anchor in a region with soils that do not hold a conventional anchor, this pear-shaped inflatable fender makes a great signal buoy.

The material from which the inflatable part is made is a high-quality polymer alloy. Products made from it resist significant mechanical stress, do not deform and do not lose color from prolonged exposure to sunlight, temperature changes, sea salt and water.