Pump springs Inox for Splash 25/30 Watermakers and Water-Pro Watermakers

44406130
1.15 

Springs are the crucial part of the bypass valve in the pump for reverse osmosis systems. They require urgent replacement in case of failure, since the protection against overpressure will be compromised.

Taxes
Fast delivery
SimpleSail
The yacht company SimpleSail was founded in 2013 as a charter operator of pleasure yac...
+38269541228
Ask a question

The reverse osmosis pump is provided with overpressure protection - check valves with springs in them. The damage to the valves will result in them not being able to switch flows and thus relieve excess pressure. If springs get conpromised or weaken it will lead to a malfunction of the bypass valve. We suggest buying a set of 8 springs for the pump in advance to prevent serious damage to the watermaker.

If you have any model of Water-Pro watermaker installed on the boat, you can buy Springs - inox for maintenance with the following parameters:

  • diam. 3x12;
  • wire 0.4;
  • production material - Inox;
  • quantity - 6 units.

Anti-corrosion stainless steel guarantees longevity of the springs.

Features of Pump springs Inox for Splash 25/30 Watermakers and Water-Pro Watermakers

Ask a Question about this product
Reviews of this product

No posts found

Have you used the product?

Tell us something about it and help others to make the right decision

Write a review
Possibly you may be interested
  • New products
  • Boatasy Presents
  • Recently Viewed