Comfort Control - control panel
The price provided is NET-price, meaning shipment and VAT are not included. Additional duties and tax payments might be required. Taxes and delivery costs are calculated after ordering the goods and depend on the type of client and delivery address.
Heating modes for air heaters:
- TEMPERATURE MODE:
Heater will maintain set temperature by reducing the heating power, without shutting off the combustion process. - POWER MODE:
Heater will operate constantly at set power level. - HEAT + VENTILATION:
Heater will operate till the temperature is reached 1°C above the set temperature, shut off the combustion process and start to ventilate till the temperature drops 5°C below the set temperature. When temperature drops, heating starts again. - THERMOSTAT MODE:
Heater will operate till the specified temperature is reached then shuts off the combustion process and ventilation. After the temperature drops by specified degrees heating will start again.
Heating modes for liquid heaters:
- PRE-HEATING MODE:
Heater will operate till the certain coolant temperature is reached then shuts off the combustion process. After the temperature of the coolant drops heating will start again. - ECO MODE:
(only for FLOW 14D)
Pre-heating mode with reduced power and fuel consumption.
Temperature of the coolant is reached slower than in “Pre-heating mode. - THERMOSTAT MODE:
(only for Flow 5)
Heater will operate till the specified interior temperature is reached then shuts off the combustion process. After the temperature drops by specified degrees heating will start again. Temperature is read by control panel.
*for setting up “Thermostat mode” see instructions for AIR heaters.
Temperature sensor
- Custom calibrated digital sensor with +/- 1.5 degree offset
Timers
Max - 3 timers.
Heating mode can be chosen for each timer.
All 3 timers can be active simultaneously.
Set timer is active continuously till disabled
Available cycles:
- ED - Every day
- EW - Every workday
- Custom days
Status display
- Display
- LED red - heating
- LED blue - ventilation
- LED green - shutting down
Wiring compatibility
- assy.2067 - Wiring for control panel (1.8 m)
- assy.2324 - Wiring for control panel (5.0 m)
- assy.3298 - Wiring for control panel (7.0 m)
- assy.4269 - Extension wiring for control panel (2.6 m)
- assy.4366 - Cable wiring for AUTOTERM Flow 5D (12V)
- assy.4044 - Cable wiring for AUTOTERM Flow 5D / 5B (12V)
- assy.4394 - AUTOTERM Flow 14D wiring harness for control panel (1.8 m)
Maximum allowed cable wiring length with Comfort Control - 10 m
AUTOTERM heater compatibility
AUTOTERM air heaters:
- AUTOTERM Air 2D
- AUTOTERM Air 4D
- AUTOTERM Air 8D
- AUTOTERM Air 9D
AUTOTERM liquid heaters:
- AUTOTERM Flow 5D / 5B
- AUTOTERM Flow 14D
Display dimensions - 37x20mm
Control panel dimensions - 82x37x19mm
No reviews found
